
HART / Modbus TCP Gateway
GT200-HT-MT
909-977-2988
WhatsApp
WhatsApp
+1-909-977-2988

Our single channel HART to Modbus TCP gateway, the GT200-HT-MT, achieves data communication that easily connects HART instruments to Schneider PLCs.
-
Technical Specification
-
Order Information
-
Download
-
Quick Start Guide
-
Selection Guide
-
Case Study
-
Related Products
-
Warranty & Service
Technical Specification:
Modbus TCP Features
- Acts as a Modbus TCP server for seamless integration with PLCs and SCADA systems.
- Supports Modbus function codes: 0x03 (Read Holding Registers), 0x04 (Read Input Registers), 0x06 (Write Single Register), and 0x10 (Write Multiple Registers).
- Handles up to 4 concurrent Modbus TCP connections.
- Supports up to 512 Modbus commands simultaneously.
- Includes IP conflict detection and automatic routing for stable network performance.
HART Features
- One HART interface can be configured as either a primary or secondary master.
- Supports both point-to-point and multi-drop communication modes.
- Point-to-point mode supports burst communication for faster data updates.
- Multi-drop mode allows connection of up to 15 HART instruments (actual number depends on field conditions).
- Supports all standard HART protocol commands.
- Each HART command can be configured to output in change-of-state, polling, initialization, or disabled mode.
- Supports up to 100 configurable HART commands.
- Maximum output data: 1000 bytes; maximum input data: 1600 bytes.
General
- Power supply: 24VDC (range: 11–30VDC), 70mA @ 24VDC.
- Operating temperature: -40°C to 60°C (-40°F to 140°F).
- Humidity: 5% to 95% RH (non-condensing).
Physical Features
- Dimension(W*H*D): 1.0 in * 4.0 in * 3.6 in (25 mm * 100 mm * 90 mm).
- Mounting: 35mm DIN rail.
- Protection rating: IP20.
File | Type | Time | Download |
---|